XCS20-3VQ100C

XCS20-3VQ100C FPGAs Overview

Introduction 

The Spartan® and the Spartan-XL FPGA families are a high-volume production FPGA solution that delivers all the key requirements for ASIC replacement up to 40,000 gates. These requirements include high performance, on-chip RAM, core solutions and prices that, in high volume, approach and in many cases are equivalent to mask programmed ASIC devices. 

By streamlining the Spartan series feature set, leveraging advanced process technologies and focusing on total cost management, the Spartan series delivers the key features required by ASIC and other high-volume logic users while avoiding the initial cost, long development cycles and inherent risk of conventional ASICs. 

Spartan/Spartan-XL FPGA Features 

Note: The Spartan series devices described in this data sheet include the 5V Spartan family and the 3.3V Spartan-XL family. See the separate data sheets for more advanced members for the Spartan Series

• First ASIC replacement FPGA for high-volume production with on-chip RAM
• Density up to 1862 logic cells or 40,000 system gates
• Streamlined feature set based on XC4000 architecture
• System performance beyond 80 MHz
• Broad set of AllianceCORE and LogiCORE™predefined solutions available
• Unlimited reprogrammability
• Low cost

• System level features
  - Available in both 5V and 3.3V versions
  - On-chip SelectRAM™ memory
  - Fully PCI compliant
  - Full readback capability for program verification and internal node observability
  - Dedicated high-speed carry logic
  - Internal 3-state bus capability
  - Eight global low-skew clock or signal networks
  - IEEE 1149.1-compatible Boundary Scan logic
  - Low cost plastic packages available in all densities
  - Footprint compatibility in common packages
• Fully supported by powerful Xilinx ISE® Classics development system
  - Fully automatic mapping, placement and routing

Additional Spartan-XL Family Features
• 3.3V supply for low power with 5V tolerant I/Os
• Power down input
• Higher performance
• Faster carry logic
• More flexible high-speed clock network
• Latch capability in Configurable Logic Blocks
• Input fast capture latch
• Optional MUX or 2-input function generator on outputs
• 12 mA or 24 mA output drive
• 5V and 3.3V PCI compliant
• Enhanced Boundary Scan
• Express Mode configuration

The Xilinx FPGAs (Field Programmable Gate Array) series XCS20-3VQ100C is Spartan and Spartan-XL Families Field Programmable Gate Arrays FPGA, View Substitutes & Alternatives along with datasheets, stock, pricing from Authorized Distributors at bitfoic.com, and you can also search for other FPGAs products.

Features

• In-System Programmable PROMs for Configuration of Xilinx FPGAs

• Low-Power Advanced CMOS NOR Flash Process

• Endurance of 20,000 Program/Erase Cycles

• Operation over Full Industrial Temperature Range (–40°C to +85°C)

• IEEE Standard 1149.1/1532 Boundary-Scan (JTAG) Support for Programming, Prototyping, and Testing

• JTAG Command Initiation of Standard FPGA Configuration