LCMXO2-7000HE-5BG332C

LCMXO2-7000HE-5BG332C FPGAs Overview

The MachXO2 family of ultra-low power, instant-on, non-volatile PLDs has six devices with densities ranging from 256 to 6864 Look-Up Tables (LUTs). In addition to LUT-based, low-cost programmable logic these devices feature Embedded Block RAM (EBR), Distributed RAM, User Flash Memory (UFM), Phase Locked Loops (PLLs), preengineered source synchronous I/O support, advanced configuration support including dual-boot capability and hardened versions of commonly used functions such as SPI controller, I2C controller and timer/counter. These features allow these devices to be used in low cost, high volume consumer and system applications. The Lattice Programmable Logic ICs series LCMXO2-7000HE-5BG332C is FPGA - Field Programmable Gate Array 6864 LUTs 279 I/O 1.2V 5 SPEED, View Substitutes & Alternatives along with datasheets, stock, pricing from Authorized Distributors at bitfoic.com, and you can also search for other FPGAs products.

Features

 Flexible Logic Architecture

• Six devices with 256 to 6864 LUT4s and 19 to 335 I/Os

 Ultra Low Power Devices

• Advanced 65 nm low power process

• As low as 19 µW standby power

• Programmable low swing differential I/Os

• Stand-by mode and other power saving options

 Embedded and Distributed Memory

• Up to 240 Kbits sysMEM Embedded Block RAM

• Up to 54 Kbits Distributed RAM

• Dedicated FIFO control logic

 On-Chip User Flash Memory

• Up to 256 Kbits of User Flash Memory

• 100,000 write cycles

• Accessible through WISHBONE, SPI, I2 C and JTAG interfaces

• Can be used as soft processor PROM or as Flash memory

 Pre-Engineered Source Synchronous I/O

• DDR registers in I/O cells

• Dedicated gearing logic

• 7:1 Gearing for Display I/Os

• Generic DDR, DDRX2, DDRX4

• Dedicated DDR/DDR2/LPDDR memory with DQS support

 High Performance, Flexible I/O Buffer

• Programmable sysIO buffer supports wide range of interfaces:

– LVCMOS 3.3/2.5/1.8/1.5/1.2

– LVTTL

– PCI

– LVDS, Bus-LVDS, MLVDS, RSDS, LVPECL

– SSTL 25/18

– HSTL 18

– Schmitt trigger inputs, up to 0.5V hysteresis

• I/Os support hot socketing

• On-chip differential termination

• Programmable pull-up or pull-down mode

 Flexible On-Chip Clocking

• Eight primary clocks

• Up to two edge clocks for high-speed I/O interfaces (top and bottom sides only)

• Up to two analog PLLs per device with fractional-n frequency synthesis – Wide input frequency range (10 MHz to 400 MHz)

 Non-volatile, Infinitely Reconfigurable

• Instant-on – powers up in microseconds

• Single-chip, secure solution

• Programmable through JTAG, SPI or I2 C

• Supports background programming of non-volatile memory

• Optional dual boot with external SPI memory

 TransFR Reconfiguration

• In-field logic update while system operates

 Enhanced System Level Support

• On-chip hardened functions: SPI, I2 C, timer/ counter

• On-chip oscillator with 5.5% accuracy

• Unique TraceID for system tracking

• One Time Programmable (OTP) mode

• Single power supply with extended operating range

• IEEE Standard 1149.1 boundary scan

• IEEE 1532 compliant in-system programming

 Broad Range of Package Options

• TQFP, WLCSP, ucBGA, csBGA, caBGA, ftBGA, fpBGA, QFN package options

• Small footprint package options – As small as 2.5x2.5mm

• Density migration supported

• Advanced halogen-free packaging