EPM9560ARC304-10F

EPM9560ARC304-10F FPGAs Overview

The MAX 9000 family of in-system-programmable, high-density, highperformance EPLDs is based on Altera’s third-generation MAX architecture. Fabricated on an advanced CMOS technology, the EEPROMbased MAX EPM9560ARC304-10F provides 6,000 to 12,000 usable gates, pin-to-pin delays as fast as 10 ns, and counter speeds of up to 144 MHz.

Features

■ High-performance CMOS EEPROM-based programmable logic
devices (PLDs) built on third-generation Multiple Array MatriX
(MAX) architecture
■ 5.0-V in-system programmability (ISP) through built-in IEEE Std.
1149.1 Joint Test Action Group (JTAG) interface
■ Built-in JTAG boundary-scan test (BST) circuitry compliant with IEEE
Std. 1149.1-1990
■ High-density erasable programmable logic device (EPLD) family
ranging from 6,000 to 12,000 usable gates (see Table 1)
■ 10-ns pin-to-pin logic delays with counter frequencies of up to
144 MHz
■ Fully compliant with the peripheral component interconnect Special
Interest Group’s (PCI SIG) PCI Local Bus Specification, Revision 2.2
■ Dual-output macrocell for independent use of combinatorial and
registered logic
■ FastTrack Interconnect for fast, predictable interconnect delays
■ Input/output registers with clear and clock enable on all I/O pins
■ Programmable output slew-rate control to reduce switching noise
■ MultiVolt I/O interface operation, allowing devices to interface with
3.3-V and 5.0-V devices
■ Configurable expander product-term distribution allowing up to 32
product terms per macrocell
■ Programmable power-saving mode for more than 50% power
reduction in each macrocell