EP610LI-20

EP610LI-20 FPGAs Overview

The Altera ClassicTM EP610LI-20 device offers a solution to high-speed, lowpower logic integration. Fabricated on advanced CMOS technology, EP610LI-20 devices also have a Turbo-only version, which is described in this data sheet.

Classic devices support 100% TTL emulation and can easily integrate multiple PAL- and GAL-type devices with densities ranging from 300 to 900 usable gates. The Classic family provides pin-to-pin logic delays as low as 10 ns and counter frequencies as high as 100 MHz. Classic devices are available in a wide range of packages, including ceramic dual in-line package (CerDIP), plastic dual in-line package (PDIP), plastic J-lead chip carrier (PLCC), ceramic J-lead chip carrier (JLCC), pin-grid array (PGA), and small-outline integrated circuit (SOIC) packages.

EP610LI-20 devices have 16 macrocells, 4 dedicated input pins, 16 I/O pins, and 2 global clock pins. Each macrocell can access signals from the global bus, which consists of the true and complement forms of
the dedicated inputs and the true and complement forms of either the output of the macrocell or the I/O input. The CLK1 signal is a dedicated global clock input for the registers in macrocells 9 through 16. The CLK2 signal is a dedicated global clock input for registers in macrocells 1 through 8.

EPROM-based Classic devices can reduce active power consumption without sacrificing performance. This reduced power consumption makes the Classic family well suited for a wide range of low-power applications.

Classic devices are 100% generically tested devices in windowed packages and can be erased with ultra-violet (UV) light, allowing design changes to be implemented quickly. Classic devices use sum-of-products logic and a programmable register. The sum-of-products logic provides a programmable-AND/fixed-OR structure that can implement logic with up to eight product terms. The programmable register can be individually programmed for D, T, SR, or JK flipflop operation or can be bypassed for combinatorial operation. In addition, macrocell registers can be individually clocked either by a global clock or by any input or feedback path to the AND array. Altera’s proprietary programmable I/O architecture allows the designer to program output and feedback paths for combinatorial or registered operation in both active-high and active-low modes. These features make it possible to implement a variety of logic functions simultaneously.

Classic devices are supported by Altera’s MAX+PLUS II development system, a single, integrated package that offers schematic, text—including VHDL, Verilog HDL, and the Altera Hardware Description Language (AHDL)—and waveform design entry, compilation and logic synthesis, simulation and timing analysis, and device programming. The MAX+PLUS II software provides EDIF 2 0 0 and 3 0 0, LPM, VHDL, Verilog HDL, and other interfaces for additional design entry and simulation support from other industry-standard PC- and workstationbased EDA tools. The MAX+PLUS II software runs on Windows-based PCs, as well as Sun SPARCstation, HP 9000 Series 700/800, and IBM RISC System/6000 workstations. These devices also contain on-board logic test circuitry to allow verification of function and AC specifications during standard production flow.

The Altera Classic EPLD Family series EP610LI-20 is High-performance, 16-macrocell Classic EPLD Pipelined data rates of up to 100 MHz, View Substitutes & Alternatives along with datasheets, stock, pricing from Authorized Distributors at bitfoic.com, and you can also search for other FPGAs products.

Features

■ High-performance, 16-macrocell Classic EPLD – Combinatorial speeds withtPD as fast as 10 ns

– Counter frequencies of up to 100 MHz
– Pipelined data rates of up to 125 MHz
■ Programmable I/O architecture with up to 20 inputs or 16 outputs and 2 clock pins
■ EP610 and EP610I devices are pin-, function-, and programming file-compatible
■ Programmable clock option for independent clocking of all registers
■ Macrocells individually programmable as D, T, JK, or SR flipflops, or for combinatorial operation
■ Available in the following packages (see Figure 7):
– 24-pin small-outline integrated circuit (plastic SOIC only)
– 24-pin ceramic and plastic dual in-line package (CerDIP and PDIP)
– 28-pin plastic J-lead chip carrier (PLCC)