EP1SGX10CF672C7

EP1SGX10CF672C7 FPGAs Overview

The Stratix GX family of devices is Altera’s second FPGA family to combine high-speed serial transceivers with a scalable, high-performance logic array. Stratix GX devices include 4 to 20 high-speed transceiver channels, each incorporating clock data recovery (CDR) technology and embedded SERDES capability at data rates of up to 3.1875 gigabits per second (Gbps). These transceivers are grouped by four-channel transceiver blocks, and are designed for low power consumption and small die size. The Stratix GX EP1SGX10CF672C7 FPGA technology is built upon the Stratix architecture, and offers a 1.5-V logic array with unmatched performance, flexibility, and time-to-market capabilities. This scalable, high-performance architecture makes Stratix GX devices ideal for high-speed backplane interface, chip-to-chip, and communications protocol-bridging applications.

The INTEL Embedded - FPGAs (Field Programmable Gate Array) series EP1SGX10CF672C7 is FPGA Stratix GX Family 10570 Cells 4385.97MHz 130nm Technology 1.5V 672-Pin FC-FBGA, View Substitutes & Alternatives along with datasheets, stock, pricing from Authorized Distributors at bitfoic.com, and you can also search for other FPGAs products.

Features

■ Transceiver block features are as follows:
● High-speed serial transceiver channels with CDR provides 500-megabits per second (Mbps) to 3.1875-Gbps full-duplex operation
● Devices are available with 4, 8, 16, or 20 high-speed serial transceiver channels providing up to 127.5 Gbps of full-duplex serial bandwidth
● Support for transceiver-based protocols, including 10 Gigabit Ethernet attachment unit interface (XAUI), Gigabit Ethernet (GigE), and SONET/SDH
● Compatible with PCI Express, SMPTE 292M, Fibre Channel, and Serial RapidIO I/O standards
● Programmable differential output voltage (VOD), pre-emphasis, and equalization settings for improved signal integrity
● Individual transmitter and receiver channel power-down capability implemented automatically by the Quartus II software for reduced power consumption during non-operation
● Programmable transceiver-to-FPGA interface with support for 8-, 10-, 16-, and 20-bit wide data paths
● 1.5-V pseudo current mode logic (PCML) for 500 Mbps to 3.1875 Gbps
● Support for LVDS, LVPECL, and 3.3-V PCML on reference clocks and receiver input pins (AC-coupled)
● Built-in self test (BIST)
● Hot insertion/removal protection circuitry