The high-performance, low-power Microchip 8-bit AVR® RISC-based microcontroller combines 1 KB ISP Flash memory, 64B SRAM, 64B EEPROM, a 32B register file, and a 4-channel 10-bit A/D converter. The device supports a throughput of 20 MIPS at 20 MHz and operates between 2.7-5.5 volts. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching one MIPS per MHz, balancing power consumption and processing speed.

How to program ATtiny13A with Arduino

Catalog

ⅠATtiny13 Overview

The ATtiny13 is a low-power CMOS 8-bit microcontroller based on the AVR-enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny13 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.

ⅡATtiny13 CAD Model

Symbol

Figure1-Symbol

Footprint

Figure2-Footprint

ⅢATtiny13 Pinout

Figure3-ATtiny13 Pinout

ⅣATtiny13 Pin Configuration

ⅤATtiny13 Features

• High Performance, Low Power AVR® 8-Bit Microcontroller
• Advanced RISC Architecture

– 120 Powerful Instructions

– Most Single Clock Cycle Execution

– 32 x 8 General Purpose Working Registers

– Fully Static Operation – Up to 20 MIPS Throughput at 20 MHz

• High Endurance Non-volatile Memory Segments

– 1K Bytes of In-System Self-programmable Flash program memory

– 64 Bytes EEPROM – 64 Bytes Internal SRAM

– Write/Erase cyles: 10,000 Flash/100,000 EEPROM

– Data retention: 20 years at 85°C/100 years at 25°C

– Programming Lock for Self-Programming Flash & EEPROM Data Security

• Peripheral Features

– One 8-bit Timer/Counter with Prescaler and Two PWM Channels

– 4-channel, 10-bit ADC with Internal Voltage Reference

– Programmable Watchdog Timer with Separate On-chip Oscillator

– On-chip Analog Comparator

• Special Microcontroller Features

– debugWIRE On-chip Debug System

– In-System Programmable via SPI Port

– External and Internal Interrupt Sources

– Low Power Idle, ADC Noise Reduction, and Power-down Modes

– Enhanced Power-on Reset Circuit

– Programmable Brown-out Detection Circuit

– Internal Calibrated Oscillator

• I/O and Packages

– 8-pin PDIP/SOIC: Six Programmable I/O Lines

– 20-pad MLF: Six Programmable I/O Lines

• Operating Voltage:

– 1.8 - 5.5V for ATtiny13V

– 2.7 - 5.5V for ATtiny13

• Speed Grade

– ATtiny13V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V

– ATtiny13: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V

• Industrial Temperature Range
• Low Power Consumption

– Active Mode:

• 1 MHz, 1.8V: 240 µA

– Power-down Mode:

• < 0.1 µA at 1.8V

Note: Complete technical details can be found in the ATtiny13 Datasheet, linked at the bottom of this page.

 ⅥATtiny13 Block Diagram

Figure4-ATtiny13 block diagram

ⅦATtiny13 Alternative Parts

ATtiny2313A (Exact Alternative with the new release)

ATtiny417, ATtiny28L, ATtiny48, ATmega88PA, ATmega8A, ATmega8515, ATmega8535,  ATmega645A, ATmega645A, ATmega6490

ⅧATtiny13 Package

Figure5-ATtiny13 Package

ⅨATTINY13 vs ATTINY13A

ATTINY13 vs ATTINY13A pdf

ⅩATtiny13 Datasheet

ATtiny13 microcontroller PDF

ⅪATtiny13A Manufacturer

Microchip Technology Incorporated is a leading provider of smart, connected, and secure embedded control solutions. Customers may construct the best designs possible with the help of its user-friendly development tools and wide range of products, which minimize total system cost and time to market while reducing risk. More than 120,000 customers use the company's solutions in the industrial, automotive, consumer, aerospace and defense, communications, and computer sectors. Microchip, with headquarters in Chandler, Arizona, provides excellent technical assistance, consistent delivery, and high-quality products.